JBL Vibe Beam & JLab Go Air Pop share many similarities, but there are also important differences, such as quality, performance, features, design, and connectivity. If you want the best one between them, I Would recommend the JBL Vibe Beam rather than the JLab Go Air Pop.
Why Do I Recommend The JBL Vibe Beam?
- The JBL Vibe Beam features an 8 mm dynamic driver for deeper bass and clearer mids, while the JLab Go Air Pop uses a smaller 6 mm dynamic driver.
- JBL Vibe Beam supports Bluetooth 5.2 for a more stable connection and lower latency during video streaming, whereas the JLab Go Air Pop uses Bluetooth 5.1.
- It has a 48 mAh earbud battery for longer single-charge playtime, while the JLab Go Air Pop has a 43 mAh earbud battery.
- The JBL Vibe Beam includes a 530 mAh charging case to extend total listening time across more recharges, whereas the JLab Go Air Pop comes with a 350 mAh charging case.
- JBL Vibe Beam supports a 10-minute quick charge for up to 2 hours of playback, while the JLab Go Air Pop requires 15 minutes to gain about 1 hour of playback.
- It features IP54 earbud protection design for better resistance to dust and water, whereas the JLab Go Air Pop provides only IPX4 splash protection.
- The JBL Vibe Beam comes with Ambient Aware and TalkThru modes to let in outside sounds for safer outdoor listening, while the JLab Go Air Pop lacks ambient sound features.
- JBL Vibe Beam uses the JBL Headphones app for customizable EQ and control settings, whereas the JLab Go Air Pop relies only on fixed EQ3 presets.
Maybe the JLab Go Air Pop price can make you comfortable because it’s a little bit cheaper than the JBL Vibe Beam. But you have to compromise all the above-mentioned features. Now the Decision is Yours. I hope it was helpful to choose the right one.
Side By Side Comparison
Feature | JBL Vibe Beam | JLab Go Air Pop |
Driver Size | 8 mm dynamic driver | 6 mm dynamic driver |
Bluetooth Version | Bluetooth 5.2 | Bluetooth 5.1 |
Earbud Battery Capacity | 48 mAh per earbud | 43 mAh per earbud |
Charging Case Battery | 530 mAh | 350 mAh |
Quick-Charge Speed | 10 minutes gives about 2 hours playback | 15 minutes gives about 1 hour playback |
Water Resistance | Earbuds IP54, Case IPX2 | Earbuds IPX4, Case not rated |
Ambient Features | Ambient Aware and TalkThru modes | No ambient awareness features |
Companion App | JBL Headphones app with EQ and controls | No dedicated app, uses EQ3 presets |
Earbud Weight | 4.4 g each | 3.7 g each |
Case Weight | 39.5 g | 28 g |
Microphone Features | VoiceAware for adjustable mic monitoring | Standard MEMS mic without adjustable monitoring |
Charging Connector | USB-C | Integrated USB-A charging plug |
Case Size | Larger case with more capacity | Smaller, more compact case |
Sound Tuning | Customizable EQ through app | Three preset EQ modes only |
Call Quality | Enhanced voice clarity with VoiceAware | Basic call clarity without enhancement |
Build Finish | Matte housing with rubberized feel | Glossy plastic housing |
Price | Check JBL Vibe Beam Price | Check JLab Go Air Pop Price |
Common Features
Feature | JBL Vibe Beam | JLab Go Air Pop |
True Wireless Design | Yes | Yes |
Bluetooth Connectivity | Bluetooth 5.x | Bluetooth 5.x |
In-Ear Form Factor | Yes | Yes |
Dynamic Drivers | Yes | Yes |
Frequency Response | 20 Hz–20 kHz | 20 Hz–20 kHz |
Stereo Sound | Yes | Yes |
Built-in Microphones | Yes | Yes |
Touch/Physical Controls | Yes | Yes |
Voice Assistant Support | Yes | Yes |
Single-Earbud (Mono) Use | Yes | Yes |
Battery Life per Charge | Up to 8 hours | Up to 8 hours |
Total Battery Life with Case | About 32 hours | About 32 hours |
USB-C Charging (case) | Yes | Yes |
Sweat/Splash Resistance | Yes | Yes |
Lightweight Earbuds | Yes | Yes |
Compact Charging Case | Yes | Yes |
Quick-Charge Capability | Yes | Yes |
Price | Check JBL Vibe Beam Price | Check JLab Go Air Pop Price |